H50 or ECO A.L.C

Our forum has moved!

Notice: After many long months of back and forth banter, I've decided to focus my efforts on 3dGameMan and the loyal 3dGameMan Forums and members.

Please continue to support us at 3dGameMan!

Submitted by krusaki on Tue, 03/30/2010 - 11:15
0

I was just wondering which one is better. ALC seem to have higher fan speed but I'm not sure which product has a higher pump rate and I know H50 are available up to dual fan configuration but is the ALC also up to dual fan configuration ? I really don't know which one has a better performance.

i7 950 @ 3.8, 2x768mb gtx 460, 1x32mb 500gb Western digital caviar black, Gigabyte X58 Ud3r rev2 motherboard, G skill 1600mhz 6gb triple channel ram, H70 liquid cooler, Ultra x4 750w power supply, Azza Hurrican 2000 full tower case, NZXT sentry 2 fan controller.

I haven't tested the ECO ALC,

Submitted by Rodney Reynolds on Thu, 04/01/2010 - 17:33.

I haven't tested the ECO ALC, but they are close and these would result in similar performance. Can't go wrong with either. So consider warranty, service and support.

Regards, Rodney Reynolds (www.Support3GM.com) www.RodsRig.com


Both cpu coolers will have

Submitted by JtechP on Wed, 03/31/2010 - 17:10.

Both cpu coolers will have the ability to have dual fans. For my prefrence go with the eco alc cause at kobaltcomputers the coolit did better by 6 degrees on load. I also recommend remove the thermal paste with something a little better like some Mx-3 from Artic cooling